Thermador high-end repair

Thermador repair in San Mateo

Star-burner ranges, induction cooktops and Freedom refrigeration columns — repaired with genuine OEM Thermador parts by a Sub-Zero–focused Peninsula bench.

4.9 / 5 · 873 reviews

$89 service call, waived when you book the repair · 365-day warranty on all labor · genuine OEM Sub-Zero parts.

Stainless Thermador professional range with Star burners in a San Mateo Peninsula kitchen

Freedom columns belong on a refrigeration bench

Thermador's Freedom induction and Freedom refrigeration columns are exactly the kind of integrated, panel-ready installs our Sub-Zero work prepares us for. We pull and service those columns cabinet-safe, the same way we handle a Sub-Zero Designer column in a San Mateo Park kitchen.

On the cooking side, Thermador's Star burner and Sabbath-mode controls have their own quirks. We focus on the ignition, induction and refrigeration faults that actually interrupt a kitchen, with a clear diagnosis before any OEM part goes in.

Thermador products we service

  • Star-burner ranges

    Pro and Pro Grand ranges with the star-shaped burners, convection and broiler systems.

  • Freedom induction cooktops

    Full-surface induction cooktops — coils, sensors and control faults.

  • Freedom refrigeration columns

    Integrated, panel-ready refrigerator and freezer columns — sealed system and cabinet-safe access.

  • Wall ovens & dishwashers

    Built-in wall ovens and panel-ready dishwashers integrated into cabinetry.

Typical Thermador faults we see in San Mateo

SymptomLikely causeOur first move
Star burner will not lightIgniter, spark electrode or valve faultTest ignition and gas flow; replace the failed igniter or electrode
Induction zone not heatingCoil, sensor or control-board faultVerify the coil and sensor before any board replacement
Freedom column warmEvaporator fan, defrost or sealed-system faultConfirm airflow and defrost; pull the column cabinet-safe to service
Frost or condensation at the doorGasket, drain or bay humidityReplace gasket, clear and warm the drain path

We install genuine OEM Thermador parts matched to your model and serial, follow manufacturer-recommended procedures, and keep the same cabinet-safe standard we use on Sub-Zero built-ins. We are an independent service — experienced with Thermador, not factory-authorized by it.

Thermador repair pricing in San Mateo

Draft ranges for planning; the base policy is an $89 service call, waived when you book the repair.

Service in San Mateo Draft range Time Note
Diagnostic / service call $150–$230 45–90 min model, temps, airflow, drain & defrost checks ($89 waived with repair)
Door gasket / frost-line $400–$900 1–3 h bayfront-moisture units common here
Ice maker / water line $275–$850 1–3 h valve / fill tube / module
Control board / sensor $350–$1,250 1–4 h quote after electrical proof
Compressor / sealed system $1,450–$3,600 2–6 h + parts requires pressure/electrical evidence

Draft ranges for planning; final quote depends on model, parts, cabinet access and diagnosis. Base policy: $89 service call, waived when you book the repair.

Thermador repair near you on the Peninsula

Searching "Thermador repair near me" in San Mateo? We cover San Mateo Park, Baywood, Aragon, Hayward Park, Shoreview and Sugarloaf, plus Burlingame, Hillsborough, Foster City, Belmont and San Carlos. Call with your model number for the soonest window.

Reviews

Thermador repair reviews in San Mateo

4.9 / 5 · 873 reviews
  • Thermador Freedom refrigeration column in our estate kitchen. They pulled it cabinet-safe, fixed the cooling, and you would never know they had been there. The same Sub-Zero-grade care on a different brand. Excellent.

    Nancy F. · San Mateo Park

  • Our Thermador Star burner stopped lighting. They cleaned the electrode, replaced the igniter, and were done quickly. Friendly, knowledgeable, and they treated our kitchen with respect. The 365-day labor warranty is a nice touch.

    Frank L. · Hillsborough

  • Our built-in Sub-Zero in Baywood went warm in the fridge while the freezer stayed cold. They diagnosed a failed evaporator fan, eased our panel-ready column out without a mark on the walnut cabinetry, and had genuine OEM parts on the truck. The $89 service call was waived when we booked the repair.

    Margaret H. · Baywood

Thermador repair in San Mateo — FAQ

How much does Thermador repair cost in San Mateo?

Most visits start with an $89 service call that is waived when you book the repair. Ignition and gasket work is typically the most affordable category, while induction boards and sealed-system jobs run higher. You get a firm quote only after we diagnose the exact fault on site, and all labor is backed by a 365-day warranty.

Are you a factory-authorized Thermador service?

No, and we will not pretend to be. We are an independent service with deep hands-on experience on Thermador cooking and refrigeration in San Mateo. We install genuine OEM Thermador parts and follow manufacturer-recommended procedures, but we are not affiliated with, authorized by, or endorsed by the manufacturer — you get factory-spec work without a misleading claim.

Can you service a panel-ready Freedom refrigeration column without damaging cabinetry?

Yes. Integrated, panel-ready columns are core to our Sub-Zero work, so handling them is routine. We protect the floor and panel, release the unit from its cutout, and ease it out on blankets using a cabinet-safe pull-out, then reseat it so the custom front and surrounding cabinetry stay exactly as they were — unmarked.

Do you repair Thermador induction cooktops?

Yes. We diagnose dead, flickering or under-powered zones down to the induction coil, the sensor or the control board, and replace only the component that testing proves has failed. Boards are expensive, so we verify the coil and sensor first rather than swapping the most costly part on a guess.

Which San Mateo areas do you cover for Thermador service?

All San Mateo neighborhoods — San Mateo Park, Baywood, Aragon, Hayward Park, Shoreview and Sugarloaf — plus the neighboring cities of Burlingame, Hillsborough, Foster City, Belmont and San Carlos. That covers ZIP codes 94401 through 94404, and we route the day geographically so a nearby Thermador visit is usually a short drive.

How much does Thermador Star-burner ignition repair usually cost?

It starts with the $89 service call, waived when you book the repair. Igniter and spark-electrode work is typically the most affordable category, while induction boards and sealed-system jobs run higher. You approve a firm quote after we diagnose the exact fault, and the labor is covered by our 365-day warranty.

Book a visit

Get your Thermador appliance diagnosed

Talk to a Sub-Zero–focused technician about your model, symptoms and access, then pick a window by phone or online booking.

$89 service call, waived when you book the repair. 365-day warranty on all labor.

Call (650) 484-4687 Book online